Bored&Stroked says:
"I use ASC magneto condensers/capacitors on my HC builds. These are what Bubba will supply you, though you can also purchase them from various magneto builders. There are two different ratings --> .36 uF and .28 uF.
Either would probably work for your needs - though the smaller ones are quite a bit cheaper (if cost is an issue).
If Bubba can supply you with two of the .36 uF ones for $64, that is a cheap price."
https://www.rbssuperchargers.com/Pro...er--2500-0093M
FIE/Mallory Super Mag 2/Sprint .36uF Condenser
Price: $42.95 Part No.: 2500-0093M
Categories:
Mag Drives
Mag Accessories
Mags & Coils
FIE
MALLORY
This .36uF condenser is used on Sprint Mags and Super Mag 2's. Also used on some Vertex mags that have been slightly increased in output.
Mounts internally on the point plate. Mounting hardware included.
https://www.rbssuperchargers.com/Pro...er--2500-0093N
FIE/Vertex .28uF Condenser
Price: $15.80 Part No.: 2500-0093N
Categories:
Mag Drives
Mag Accessories
Mags & Coils
VERTEX
FIE
This .28 uF condenser is used on stock output Vertex magnetos.
Mounts internally on the point plate in the stock bracket.