The Ford Barn - View Single Post

Superhart · 10-29-2021, 03:05 PM

Maybe that is my problem, the previous owner used the wrong size screws. I checked mine when I removed the hood and they were 10-32 so I thought they were correct. I will have to check this more closely. The Model A vendors don't tell you what size and pitch screws are included with these items. When I probe the holes it does seem like there is "something" inside that I can move around a little. Maybe that is the nut bobbader is talking about. Thanks, Guys.

10-29-2021, 03:05 PM	#5
Superhart Senior Member Join Date: Nov 2019 Location: Hilton head, South Carolina Posts: 121	Re: 1932 Rear Hood Retainer Problem Maybe that is my problem, the previous owner used the wrong size screws. I checked mine when I removed the hood and they were 10-32 so I thought they were correct. I will have to check this more closely. The Model A vendors don't tell you what size and pitch screws are included with these items. When I probe the holes it does seem like there is "something" inside that I can move around a little. Maybe that is the nut bobbader is talking about. Thanks, Guys.