The Ford Barn - View Single Post - Got my first T and having starting issues

39portlander · 10-06-2021, 07:59 PM

That is a very nice center door, find an NH and see how she runs narrowing down your problem. If you are in North Ridgeville there are some great folks among the "tikin T's" of central OHIO that would help you out for sure.

Vehicles that come from estates have been in limbo as you know, check vent hole on fuel tank cap. As I did, drain the fuel tank and thouroughly clean and flush out tank and sediment bowl.

As others have suggested that L4 needs some love and again a good known NH bolted on to keeper running to access the rest. Good luck and let us know how you make out.

Another common item is check the intake/exhaust port sealing, I have the 3063MC copper clad gasket set from Langs. Seals and holds things together to form a tight fit.

10-06-2021, 07:59 PM	#11
39portlander Senior Member Join Date: May 2010 Location: Suth'N Maine Posts: 2,010	Re: Got my first T and having starting issues That is a very nice center door, find an NH and see how she runs narrowing down your problem. If you are in North Ridgeville there are some great folks among the "tikin T's" of central OHIO that would help you out for sure. Vehicles that come from estates have been in limbo as you know, check vent hole on fuel tank cap. As I did, drain the fuel tank and thouroughly clean and flush out tank and sediment bowl. As others have suggested that L4 needs some love and again a good known NH bolted on to keeper running to access the rest. Good luck and let us know how you make out. Another common item is check the intake/exhaust port sealing, I have the 3063MC copper clad gasket set from Langs. Seals and holds things together to form a tight fit.