Re: No Mess Radiator Flush
Quote:
Originally Posted by Bob Johnson
You can connect a small diameter "rubber" hose to the bottom of the drain petcock. Run the hose into a 5 gallon bucket and drain the coolant. Close petcock, fill with clean water, run engine for a few minutes, then drain again. Repeat until you are satisfied that the anti freeze is gone. Now you can take off the hoses and water pump without anti-freeze spilling all over the place. Bob
|
Ditto
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
|