The Ford Barn - View Single Post - Model A C-Cab project

Keith True · 08-13-2021, 09:56 AM

If you have any junkyards around you can find that exact hardware on the inside of the doors on old step vans.Those parts would be on the left inside of the double doors.The right opens from the outside,then you reach in and open the left.The problem with that is when scrap skyrocketed about 10-12 years ago the yards cleaned up.When the yards would run one of those vans over the scales and bring hom $13-$1500.they didn't want to keep many to sell $10.parts.You might want to look at a place called,Mill Supply,I think it's in New Jersey.That is where I have always bought step van parts.headlight doors,heater and fan parts,but most of all window and door hardware.

08-13-2021, 09:56 AM	#5
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,421	Re: Model A C-Cab project If you have any junkyards around you can find that exact hardware on the inside of the doors on old step vans.Those parts would be on the left inside of the double doors.The right opens from the outside,then you reach in and open the left.The problem with that is when scrap skyrocketed about 10-12 years ago the yards cleaned up.When the yards would run one of those vans over the scales and bring hom $13-$1500.they didn't want to keep many to sell $10.parts.You might want to look at a place called,Mill Supply,I think it's in New Jersey.That is where I have always bought step van parts.headlight doors,heater and fan parts,but most of all window and door hardware.