Quote:
Originally Posted by mike42
Hey Rock…….thx for the info. I’m up to my butt on working on my house property and don’t have the time right now, but I’ll look into your suggestions. It was running great for 425 miles after new brakes and carb and then all of a sudden it started this problem. There is no problem starting. Hit the button and it fires right up ! Idles great at 500 rpm. I did notice the fuel reg was only showing 1 psi though ! More later.
Thx again…..Mike
|
Could be the condenser as it gets hot??? Also who's points are you using???? There are plenty of junk points out there too. That's why I suggested Mike at Third Gen as he can run it on his Sun Machine, check ALL the important "stuff" like good points, make sure your vacuum advance is working smoothly and correctly, set the dwell properly. ALSO make sure nothing is worn beyond usefulness..Its "Jam up and Jelly tight" when he gets done with it!!!!