The Ford Barn - View Single Post

redmodelt · 06-18-2021, 09:23 PM

Don't know how to help except a suggestion or two. Look on line for that model number, there are a lot of diagrams there to make sure you are wiring correct if you don't have a diagram. If you are not using the brake and don't have 4 way, why not get a simpler model that just does turns. Could be not enough load and the unit is hiper flashing or the switch is not grounded to were it is mounted. Or just could be a bad switch with internal short?

06-18-2021, 09:23 PM	#3
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,408	Re: Turn signal issue Don't know how to help except a suggestion or two. Look on line for that model number, there are a lot of diagrams there to make sure you are wiring correct if you don't have a diagram. If you are not using the brake and don't have 4 way, why not get a simpler model that just does turns. Could be not enough load and the unit is hiper flashing or the switch is not grounded to were it is mounted. Or just could be a bad switch with internal short? __________________ I know the voices aren't real but damn they have some good ideas!