The Ford Barn - View Single Post

Patrick L. · 05-22-2021, 08:15 AM

Yep, if you have voltage at points when they are closed then there is a bad contact. Try cleaning the points and check again. With points closed there should be a reading of 0v.

05-22-2021, 08:15 AM	#5
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Hard starting Yep, if you have voltage at points when they are closed then there is a bad contact. Try cleaning the points and check again. With points closed there should be a reading of 0v.