The Ford Barn - View Single Post

Redbird · 05-09-2021, 05:03 PM

Do not put water in the tank. You can use some pipe dope or plumbers tape to put the valve with pencil filter back in the tank. Place a plastic pale beneath the valve. Then just pour a little gas in the tank to see if it leaks. If not, then hook the gas line back up and check for leaks again after opening the valve.

05-09-2021, 05:03 PM	#2
Redbird Senior Member Join Date: Feb 2015 Location: Georgetown, TX Posts: 536	Re: Gas Shut Off Valve testing Do not put water in the tank. You can use some pipe dope or plumbers tape to put the valve with pencil filter back in the tank. Place a plastic pale beneath the valve. Then just pour a little gas in the tank to see if it leaks. If not, then hook the gas line back up and check for leaks again after opening the valve.