The Ford Barn - View Single Post

Bored&Stroked · 05-06-2021, 11:52 AM

It is not too hard to align the marks and press the gear on - using a regular hydraulic press. So if you have the parts, then a local machine shop should be able to do it without any drama. I'd use an aluminum press-on gear if it was mine . . . or update it to a bolt on cam gear setup (which you have).

05-06-2021, 11:52 AM	#7
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,723	Re: Installing Cam Gear on 1936 Camshaft It is not too hard to align the marks and press the gear on - using a regular hydraulic press. So if you have the parts, then a local machine shop should be able to do it without any drama. I'd use an aluminum press-on gear if it was mine . . . or update it to a bolt on cam gear setup (which you have).