The Ford Barn - View Single Post

Benson · 04-30-2021, 08:51 PM

The longer idle Jet is only for the EARLY 1928 Double Venturi carburetors ( the ones without the brass secondary well insert in the lower casting).

If longer idle jet is used in newer carbs with the brass secondary well, the longer idle jet will be bent when you tighten up the bolt!

04-30-2021, 08:51 PM	#7
Benson Senior Member Join Date: May 2010 Location: Cen~Col - Central Highlands Posts: 2,757	Re: Carburater The longer idle Jet is only for the EARLY 1928 Double Venturi carburetors ( the ones without the brass secondary well insert in the lower casting). If longer idle jet is used in newer carbs with the brass secondary well, the longer idle jet will be bent when you tighten up the bolt! Last edited by Benson; 05-01-2021 at 11:12 AM.