The Ford Barn - View Single Post - 1936 pickup rewire with new dash and lighting harnesses

rottenron36 · 04-15-2021, 08:01 PM

New 3rdgenauto, nice dash and lighting. don't understand were the power is coming from as i can disconnect the yellow red wire from the lighting switch and put 6 volt and all the dash works. NO power when connected to the yellow red from the light switch. Not sure where the power is suppose to come from. All wires hooked up per the drawings. It seems the only power from the solenoid goes to the horn. HELP!!!!! Thanks Ron PS need to know what to test.

04-15-2021, 08:01 PM	#5
rottenron36 Senior Member Join Date: May 2012 Location: Corbett OR Posts: 237	Re: 1936 pickup rewire with new dash and lighting harnesses New 3rdgenauto, nice dash and lighting. don't understand were the power is coming from as i can disconnect the yellow red wire from the lighting switch and put 6 volt and all the dash works. NO power when connected to the yellow red from the light switch. Not sure where the power is suppose to come from. All wires hooked up per the drawings. It seems the only power from the solenoid goes to the horn. HELP!!!!! Thanks Ron PS need to know what to test.