The Ford Barn - View Single Post

JM 35 Sedan · 04-07-2021, 10:16 AM

One difference in the cast vs. stamped steel bell housing, that I recall, is the cast/truck bell will accept up to an 11" c&pp, while the stamped steel will only take up to a 10" c&pp. This may only be a factor/consideration for a truck that requires an 11".

04-07-2021, 10:16 AM	#7
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: Flat Head Bell Housing One difference in the cast vs. stamped steel bell housing, that I recall, is the cast/truck bell will accept up to an 11" c&pp, while the stamped steel will only take up to a 10" c&pp. This may only be a factor/consideration for a truck that requires an 11". __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*