View Single Post
Old 04-06-2021, 06:12 PM   #14
Jack E/NJ
Senior Member
 
Jack E/NJ's Avatar
 
Join Date: May 2010
Posts: 2,259
Default Re: Calculate actual quench height

>>>Before having the issue[ ] that caused the Pistons to have to b replaced it seemed to run OK.>>>


Then it should run even more OK with domes with no apparent head-slap danger. But might shake a bit more with the Al rods. If it was mine, I'd probably run it as-is to see how it goes. Then go from there. Jack E/NJ
Jack E/NJ is offline   Reply With Quote