The Ford Barn - View Single Post

19Fordy · 03-26-2021, 05:09 PM

As has been said, make sure you have the correct matching bell bousing with matching starter plate as they all do not install at the same angle. That creates 'meshing" problems with flywheel.

03-26-2021, 05:09 PM	#4
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,041	Re: 1953 Ford starter issue As has been said, make sure you have the correct matching bell bousing with matching starter plate as they all do not install at the same angle. That creates 'meshing" problems with flywheel. Last edited by 19Fordy; 03-26-2021 at 06:02 PM.