The Ford Barn - View Single Post

GaryU. · 03-26-2021, 04:27 PM

I would think a vise with soft jaws(rubber around the new shaft) and as close to the lever as possible would work. Then a drift to peen the brass lever end down. Help me guys, where's CharlieNY to chime in. Be patient more experienced help is on the way.

03-26-2021, 04:27 PM	#2
GaryU. Senior Member Join Date: May 2010 Location: Beaver Dam, Wisconsin Posts: 831	Re: Holley 94 throttle shaft I would think a vise with soft jaws(rubber around the new shaft) and as close to the lever as possible would work. Then a drift to peen the brass lever end down. Help me guys, where's CharlieNY to chime in. Be patient more experienced help is on the way.