The Ford Barn - View Single Post

Bored&Stroked · 03-25-2021, 08:38 AM

A good spring shop should be able to handle it - but you need to check with them and see if they can handle curved springs. As a side not, am looking into this very issue in Columbus this week - as I have a friend who needs to re-arch his rear spring and reverse the eyes (to lower the car). We're going to find out if the local spring shop can actually do this (they say they can) - will report back . . .

03-25-2021, 08:38 AM	#3
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,723	Re: 1932 Ford 3 widow coupe A good spring shop should be able to handle it - but you need to check with them and see if they can handle curved springs. As a side not, am looking into this very issue in Columbus this week - as I have a friend who needs to re-arch his rear spring and reverse the eyes (to lower the car). We're going to find out if the local spring shop can actually do this (they say they can) - will report back . . .