The Ford Barn - View Single Post

Floyd · 01-31-2021, 04:29 PM

I agree that you will find it, look for a used one. I actually found a NOS set at Lil Dearborn. Make sure you get the correct part which is 01C-8215 which is about 7 inches long. The car handles are listed 01A-xxxx. The number is cast into the underside of the handle so easy to tell which one is correct. the car handles I believe are shorter. Using them will leave part of the nose trim piece exposed.
Interesting that lots of good project cars and trucks come out of MT as it is dry.

01-31-2021, 04:29 PM	#4
Floyd Senior Member Join Date: May 2010 Posts: 485	Re: 40 Pickup Hood Release I agree that you will find it, look for a used one. I actually found a NOS set at Lil Dearborn. Make sure you get the correct part which is 01C-8215 which is about 7 inches long. The car handles are listed 01A-xxxx. The number is cast into the underside of the handle so easy to tell which one is correct. the car handles I believe are shorter. Using them will leave part of the nose trim piece exposed. Interesting that lots of good project cars and trucks come out of MT as it is dry.