[Richard (EV8G)]

As posted above, the "hub" on the fan is about 1" wide for 33-36. That is about all there is room for on a 33-34 at least...

After you obtain the proper fan/hub, the next fun comes when you realize that the reproduction radiator (probably) does not have the "well" in the bottom rearward of the upper tank that is required for fan clearance, since the fan has to be up high enough for the blades to clear the distributor and coil which are directly below it. Depending on the intake manifold generator mount height (low vs high) there may be other problems??? Like alot of other things, I did learn all this the "hard way."