Quote:
Originally Posted by Oldbluoval
Looks like print shows 11/16.....that ain’t out there
|
This is where a drum sander comes in handy. The ¾" Plywood has a nominal thickness ²³⁄₃₂" which is 0.719", and the ¹¹⁄₁₆" Plywood should have a finish size of around 0.687". That means if we remove about 15-thousands off each side of the ¾" Plywood, then we have the proper thickness.
Where I am struggling is trying to make ½" (0.500") Plywood for Station Wagon bodies. The print calls for a ⅜" birch core with two ¹⁄₁₆" birch veneers laminated.