The Ford Barn - View Single Post

Made to last · 09-21-2020, 06:27 PM

Thanks to everyone that have helped guide me in restoring the gas tank on my 33. I have another problem as I re mount the tank. There are 3 bolts with a washer, nut, and rubber bushing to mount the tank. That said, stupid me did not pay attention to what goes where. It would seem to me the bushings are for vibration dampening, but when I try to install them between the tank and frame there is no clearance. Can anyone describe the order in which the bolt, washer, bushing and nut are to be installed?

09-21-2020, 06:27 PM	#1
Made to last Junior Member Join Date: Sep 2020 Posts: 5	Gas tank mounting conundrum Thanks to everyone that have helped guide me in restoring the gas tank on my 33. I have another problem as I re mount the tank. There are 3 bolts with a washer, nut, and rubber bushing to mount the tank. That said, stupid me did not pay attention to what goes where. It would seem to me the bushings are for vibration dampening, but when I try to install them between the tank and frame there is no clearance. Can anyone describe the order in which the bolt, washer, bushing and nut are to be installed?