Quote:
Originally Posted by lignell
did the 39 ford have fittings to grease the car
|
If I recall correctly there are 16.
Tie rod ends (4).
Spindle pin bushings - two per side (4)
Shift lever arms near top of column under hood (1)
Universal joint (1)
Transmission shaft (2)
Clutch activating lever (1)
Clutch pedal (1)
Brake pedal (1)
Torque tube center bearing (1)
If you have the early design sway bar,
some of the swivels had a grease fitting. That would add two...
Did I miss any guys?