The Ford Barn - View Single Post

Phil Brown · 08-22-2020, 12:47 PM

The cut on the torque tube /driveshaft is more than the 1/2". the trans is a longer in length than the A that"s why you have to shorting things up. The AA bellhousing makes it so that you do not have to cut the crossmember of the frame and places the gearshift closer to the orig. location. But you do need to make a pedal mount.

08-22-2020, 12:47 PM	#12
Phil Brown Senior Member Join Date: May 2010 Location: Santee Calif. Posts: 638	Re: What Overdrive Transmission is this? The cut on the torque tube /driveshaft is more than the 1/2". the trans is a longer in length than the A that"s why you have to shorting things up. The AA bellhousing makes it so that you do not have to cut the crossmember of the frame and places the gearshift closer to the orig. location. But you do need to make a pedal mount.