The Ford Barn - View Single Post

Chuck Dempsey · 07-16-2020, 03:47 PM

I once had a problem where the distributor plate was not 'grounding' against the base. Sometimes it would, sometimes not.... I removed the plate and 'sanded' the prongs that slide in the slot, and that fixed it.

07-16-2020, 03:47 PM	#4
Chuck Dempsey Senior Member Join Date: May 2010 Location: Waynesville, NC Posts: 963	Re: Frustration I once had a problem where the distributor plate was not 'grounding' against the base. Sometimes it would, sometimes not.... I removed the plate and 'sanded' the prongs that slide in the slot, and that fixed it.