The Ford Barn - View Single Post

highbeams · 06-15-2020, 06:21 PM

Yes! I never knew that there was a torque tube bearing in my 1936 Ford half-ton until the bearing let me know with a terrible racket! "What the . . ."

Oh, that poor bearing certainly was neglected since new. Not a spot of grease anywhere! SOME YEARS DO NOT HAVE THE BEARING; SOME DO I now understand by reading up on it.

AND the bearing is not necessarily where the Zerk fitting is!

One could pump the entire torque tube fulla grease & not touch the bearing!

Look down the tube, 'hook' the bearing & replace if nec.(standard bearing)

06-15-2020, 06:21 PM	#12
highbeams Senior Member Join Date: Dec 2014 Location: California Posts: 914	Re: Cleaning Out Bearing In Torque Tube Yes! I never knew that there was a torque tube bearing in my 1936 Ford half-ton until the bearing let me know with a terrible racket! "What the . . ." Oh, that poor bearing certainly was neglected since new. Not a spot of grease anywhere! SOME YEARS DO NOT HAVE THE BEARING; SOME DO I now understand by reading up on it. AND the bearing is not necessarily where the Zerk fitting is! One could pump the entire torque tube fulla grease & not touch the bearing! Look down the tube, 'hook' the bearing & replace if nec.(standard bearing) Last edited by highbeams; 06-15-2020 at 06:34 PM. Reason: forgot to add info.