Quote:
Originally Posted by Y-Blockhead
There is a special wrench by Snap-on (if you can find one) or use the cheapy one you get from the vendors.
http://www.fordgarage.com/pages/snaponheadwrench.htm
You don't say what year your car is but I find on the '30-31 a thin walled 12pt ⅜" drive socket will fit the water neck. It is tighter on the '28-29. You may have to pull the distributor...
|
The car is a 1931. I didn’t know there was a difference for the older year engines.
Sent from my iPhone using Tapatalk