The Ford Barn - View Single Post - Murray drivers door latch diagram and how to rebuild

Ray in La Mesa · 03-20-2020, 10:10 PM

Sounds like you have to remove the latch from the door, disassemble it & see what's worn. Probably riveted together, most likely the actuating lever turned by the door handle is worn where it pushes against the latch slide.

03-20-2020, 10:10 PM	#4
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,173	Re: Murray drivers door latch diagram and how to rebuild Sounds like you have to remove the latch from the door, disassemble it & see what's worn. Probably riveted together, most likely the actuating lever turned by the door handle is worn where it pushes against the latch slide.