Re: Bearing on King Pins question
US made Timken bearings are quality bearings but not the only quality bearing manufacturer. You should continue to make a case about your poor quality experience with Brattons. They should rectify the problem. If you have the Timken bearing number any bearing supplier should be able to cross reference this number with another bearing manufacturer. Your problem is solvable but you shouldn't have to go and look for an alternative. You should be able to take the kit out of the box and install it without having to do what you have described. You could go to one of the other parts suppliers and try them. This might not solve your problem though as most of our parts suppliers buy from the same resources
|