Quote:
Originally Posted by Phil Gillespie
Appreciate your input and will follow. Just measured the bore, 1st time Ive had the heads off. Was told it was 3 3/16 plus 40 thou over.
It is infact 125 thou over at 3.200 measurement. Heads to be dropped off tomorrow with a" promised" 2 day turn around. Have had the EAB heads for a couple of years so nows the time to exchange.
The head torque got off Van Pelt site but will be guided by 45 ft/lbs.
Phil NZ
|
Hi Phil. Stock bore of 3.188 plus .020" would be 3.208" . Could that be what your seeing? .125 over would be 3.313" . Please let us know how the EAB heads perform!
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302