The Ford Barn - View Single Post

Tom Wesenberg · 10-03-2019, 07:44 PM

Sounds like you have an open inside the cutout. Either the diode is burned out, or has a bad connection. If it is a voltage regulator cutout, then the output voltage should be 7 volts or a hair more. A&L makes a quality diode cutout, and Bert's sells a good rebuilt original cutout.

10-03-2019, 07:44 PM	#5
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Model A Electrical Inquiry re: cut out Sounds like you have an open inside the cutout. Either the diode is burned out, or has a bad connection. If it is a voltage regulator cutout, then the output voltage should be 7 volts or a hair more. A&L makes a quality diode cutout, and Bert's sells a good rebuilt original cutout.