Re: T5 Shift Problems
Full of fluid and not leaking does not guarantee the workings of either the master, or the slave.
Typically a failing of either cylinder will show up as you describe. A gradual loss of service resulting in harder shifts. Particularly trying to engage first gear at a standstill.
To verify the action it helps to have a buddy work the pedal while you measure the action at the slave. Or even better if you remove enough flooring to view the slave.
First thing though, I would try bleeding the slave to remove the possibility of air having gotten into the picture.
Good Luck.
__________________
Enjoy yer day. Tom
Hate can't fix what it started.
|