Quote:
Originally Posted by Railcarmover
Depends on what is causing it to bind.The best solution to your issue is to disassemble your engine completely,then re assemble insuring everything is in spec. There are many possible causes,the only way to know for sure is to 'put your finger' on the problem,anything else is speculation.The only way to effectively repair an issue is to find the root cause.
|
We disassembled the engine, "miked" it and then reassembled with the smaller pistons. I'll look around for the measurements. It was real tight but we thought that it would work. Obviously not.
Thanks Railcarmover.