The Ford Barn - View Single Post

Tom Wesenberg · 03-21-2011, 09:29 PM

Use your little finger to lightly push the brake lever rearward (should be about 15* forward tilt) and at the same time use your other hand to very lightly pull the brake rod forward. This take out the FREEPLAY and now you can turn the clevis until the pin just slips in.

03-21-2011, 09:29 PM	#8
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Proper Brake Rod Adjustment Use your little finger to lightly push the brake lever rearward (should be about 15* forward tilt) and at the same time use your other hand to very lightly pull the brake rod forward. This take out the FREEPLAY and now you can turn the clevis until the pin just slips in.