The Ford Barn - View Single Post

glennpm · 07-26-2019, 06:36 AM

Leaving the ballasts in the circuit increases the power required for the LEDs, also another source of failure with the ballasts. I went with the ballast bypass type, a little more wiring but worth it to me.

07-26-2019, 06:36 AM	#2
glennpm Senior Member Join Date: Sep 2014 Location: Mid-Coast Maine Posts: 2,815	Re: Shop led lighting Leaving the ballasts in the circuit increases the power required for the LEDs, also another source of failure with the ballasts. I went with the ballast bypass type, a little more wiring but worth it to me.