The Ford Barn - View Single Post

100IH · 07-10-2019, 12:01 PM

Everyone needs to learn a method that is always useful under all circumstances. That means don't rely on the distributor. On a new engine or just after head gasket the dist. has been out and needs to be re-installed in time with the camshaft position so one needs a method that does not rely on the rotor. If the rotor has not been moved, that's OK but often the thin washer underneath dist. cam can get lost leaving the cam able to migrate out of time with eveything else.

07-10-2019, 12:01 PM	#1
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 971	Re: Locating dimple on timing gear Everyone needs to learn a method that is always useful under all circumstances. That means don't rely on the distributor. On a new engine or just after head gasket the dist. has been out and needs to be re-installed in time with the camshaft position so one needs a method that does not rely on the rotor. If the rotor has not been moved, that's OK but often the thin washer underneath dist. cam can get lost leaving the cam able to migrate out of time with eveything else.