I need about 5-6 of these special washers. They are used on the two rear passenger door hinges to seat the special clipped head 5/16th" hinge machine screws. I've sourced new hinge machine screws and they are excellent products but the replacement washers are too deep to seat properly in the counter-sunk hinge screw holes. Any of you guys have a few extras you'd part with? I know that they were used on 41 wagons but do not know for sure if they were also used on 42-48 wagons. The OD is 3/4" and the ID is just slightly over 5/16"(hard to measure since it's not a round hole).
IMG_0738-2.jpg