The Ford Barn - View Single Post

Y-Blockhead · 05-04-2019, 11:58 AM

Werner, look closely at the modified venturi in post #92. The top vent to atmosphere in your picture also needs to be completely blocked off. The vent in my picture is filled with JB weld.

I will add a picture of my carb throat when I get a chance. I is vented just in front of the venturi. (towards the air filter).

3/16" hole in carb throat.

Renner's Corner balances carbs if you feel the need to get outside help. http://rennerscorner.com/index.html

05-04-2019, 11:58 AM	#1
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 6,641	Re: Air filter for Model A Werner, look closely at the modified venturi in post #92. The top vent to atmosphere in your picture also needs to be completely blocked off. The vent in my picture is filled with JB weld. I will add a picture of my carb throat when I get a chance. I is vented just in front of the venturi. (towards the air filter). 3/16" hole in carb throat. Renner's Corner balances carbs if you feel the need to get outside help. http://rennerscorner.com/index.html Last edited by Y-Blockhead; 05-04-2019 at 12:30 PM.