The Ford Barn - View Single Post

Byron Warwick · 04-12-2019, 01:57 PM

I know that i am a driveway mechanic, but I have pulled two engines to have them overhauled. No I did not do the actual machining that was required, but i am proficient enough to do many of the jobs that are required for re-assembly.
Is there any other way to seal this 1/2 to 3/4" long crack? JB Weld epoxy on the crack and on the head gasket?
Guess I will just try to reseal the center bolt, and if that does not help, then pull the head to see what is going on.
Thanks for your replies.
Cheers, Byron.

04-12-2019, 01:57 PM	#7
Byron Warwick Senior Member Join Date: May 2010 Location: Corunna, Ontario, Canada Posts: 309	Re: Exhaust in coolant I know that i am a driveway mechanic, but I have pulled two engines to have them overhauled. No I did not do the actual machining that was required, but i am proficient enough to do many of the jobs that are required for re-assembly. Is there any other way to seal this 1/2 to 3/4" long crack? JB Weld epoxy on the crack and on the head gasket? Guess I will just try to reseal the center bolt, and if that does not help, then pull the head to see what is going on. Thanks for your replies. Cheers, Byron. __________________ IT'S NOT YOUR AGE, IT'S YOUR ATTITUDE !