Re: Need help with dual gauge
BOB I haven’t seen the nick. Gauge man says he has it. I am going to examine the tubing with a magnifying glass when we take this one out. The only place for a nick would be where the tube passes through the firewall. I can believe that the tube could be punctured at this point if the installer were not careful but not 3 times!
Yesterday I removed the sender from the hose and plunged the sender into 162 degree water. It brought the red up into the “low” normal area but while running it only moves it to thr “cold” area at the very bottom.
Ricosan
Ricosan
|