The Ford Barn - View Single Post

Russ/40 · 03-03-2019, 07:39 PM

Like Brent said. Blast off all the rust and smear JB Weld as a liner over the entire inside and at the edge.
Use the slow set, not the quick.

03-03-2019, 07:39 PM	#5
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Water Inlet Questions Like Brent said. Blast off all the rust and smear JB Weld as a liner over the entire inside and at the edge. Use the slow set, not the quick.