Thread: Engine location
View Single Post
Old 02-03-2019, 06:32 PM   #12
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 17,408
Default Re: Engine location

The bottom line is that each different modification or alteration from original is different. All measurements are irrelevant unless you follow the model in all respects. It's not that hard to find a way to mock things up. If you weld something without mocking it up then don't be too surprised when you have to cut it out and change it.
rotorwrench is online now   Reply With Quote