The Ford Barn - View Single Post

khschs · 02-02-2019, 06:28 PM

Thanks fellas for your response. What I have here is a modified 32 chassis with a model A front crossmember in the original location. The original K member has been removed and replaced with a crossmember to support a C4. Motor mounts have been welded to the side rails 9" back c-c from the radiator mount hole. The firewall has been cut. I would like to know how much set back, if any, this deviates from the stock location.
Keith

02-02-2019, 06:28 PM	#2
khschs Member Join Date: Mar 2012 Posts: 70	Re: Engine location Thanks fellas for your response. What I have here is a modified 32 chassis with a model A front crossmember in the original location. The original K member has been removed and replaced with a crossmember to support a C4. Motor mounts have been welded to the side rails 9" back c-c from the radiator mount hole. The firewall has been cut. I would like to know how much set back, if any, this deviates from the stock location. Keith