The Ford Barn - View Single Post

cas3 · 02-02-2019, 04:14 PM

i have never built a 32, but if you have the k member, trans mount and trans, that tells the front to back story. original front mounts will still mount on a 59a block if you have a set, otherwise shoot for the crank nut to center in the spring mount / hand crank loop.

02-02-2019, 04:14 PM	#2
cas3 Senior Member Join Date: Jan 2011 Location: Beverly Kansas Posts: 5,296	Re: Engine location i have never built a 32, but if you have the k member, trans mount and trans, that tells the front to back story. original front mounts will still mount on a 59a block if you have a set, otherwise shoot for the crank nut to center in the spring mount / hand crank loop.