Quote:
Originally Posted by Cool Hand Lurker
I want to convert my wipers from vacuum to electric 12V using the original mechanism. Has anybody done this? I have not looked under the dash yet to see what is involved because the car is out for upholstery. I would like to get on the project as soon as it gets back. Any help or instructions would be welcome. Thanks
|
I did this with my car.. it is a simple swap out under the dash.. don't forget to wire the switch to at least a 15 amp fuse.. also, put a little locktight on the nut (off the motor shaft) that controls the arms.. mine came loose, to fix it I had to turn on the wiper, then shut it down mid arc so the screw would be accessible under the dash..
