The Ford Barn - View Single Post

Ernie Vitucci · 12-20-2018, 10:24 AM

Good Morning all...Walt Bratton also offers a 1/4 turn ball valve system that goes between the stock valve and the fire wall. With it, you never turn the stock valve again, just leave it open. I've had one for years. When I shut down for the day, I shut off the valve and idle for a couple of minutes and no leaks. If I forget to turn off the valve then I'll get a little carb drip overnight. You can find this system on page 62 of the 2017 Catalogue the 28/29 is part number 13330 and the 30/31 part number is 13350. Ernie in Arizona

12-20-2018, 10:24 AM	#15
Ernie Vitucci Senior Member Join Date: May 2016 Location: Scottsdale, Arizona Posts: 656	Re: Gas Shutoff Valve Good Morning all...Walt Bratton also offers a 1/4 turn ball valve system that goes between the stock valve and the fire wall. With it, you never turn the stock valve again, just leave it open. I've had one for years. When I shut down for the day, I shut off the valve and idle for a couple of minutes and no leaks. If I forget to turn off the valve then I'll get a little carb drip overnight. You can find this system on page 62 of the 2017 Catalogue the 28/29 is part number 13330 and the 30/31 part number is 13350. Ernie in Arizona