The Ford Barn - View Single Post

Flathead · 11-04-2018, 05:25 PM

It looks like a V8 head at first glance but the bolt pattern is not for a V8, no way. I think it could be for an A or B. I see a hole for the distributor, the plugs would be centered between the valves with the last four head bolts right next to them. I don't know what he water pump deal would be, unless the head is super thick. Maybe a remote pump/no pump? Does it say Kong? I can't tell. If Jim Brierly hasn't seen one, it has to be super rare.

11-04-2018, 05:25 PM	#14
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,617	Re: Kong Head for Model A/B engine It looks like a V8 head at first glance but the bolt pattern is not for a V8, no way. I think it could be for an A or B. I see a hole for the distributor, the plugs would be centered between the valves with the last four head bolts right next to them. I don't know what he water pump deal would be, unless the head is super thick. Maybe a remote pump/no pump? Does it say Kong? I can't tell. If Jim Brierly hasn't seen one, it has to be super rare.