The Ford Barn - View Single Post

Nico73 · 10-27-2018, 05:46 PM

Hello Gentlemans,
what should be the right clutch parts für my 1934 Ford BB 1.5 Ton Truck?
These Clutch is installed, but i am not happy because the clearance between the fingers & the bearing is far too much. Its the 4 Speed Transmission, but i am a little bit affraid to buy at Macs because of the low quality.

Thanks for any advise, Nico

https://www.fordbarn.com/forum/pictu...ictureid=40893

10-27-2018, 05:46 PM	#1
Nico73 Member Join Date: Sep 2017 Location: Hamburg Germany Posts: 36	Right Clutch Pressure Plate? Hello Gentlemans, what should be the right clutch parts für my 1934 Ford BB 1.5 Ton Truck? These Clutch is installed, but i am not happy because the clearance between the fingers & the bearing is far too much. Its the 4 Speed Transmission, but i am a little bit affraid to buy at Macs because of the low quality. Thanks for any advise, Nico https://www.fordbarn.com/forum/pictu...ictureid=40893 Last edited by Nico73; 10-27-2018 at 06:20 PM.