The Ford Barn - View Single Post

JSeery · 10-02-2018, 10:33 AM

Very common to cut the shafts to make shipping the steering box easier. And fairly simple to reweld the box to the upper shaft. I like to weld the two pieces together and then weld a collar over the joint. The shaft does have to be welded straight and with high quality welds.

10-02-2018, 10:33 AM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Sawn off steering shaft Very common to cut the shafts to make shipping the steering box easier. And fairly simple to reweld the box to the upper shaft. I like to weld the two pieces together and then weld a collar over the joint. The shaft does have to be welded straight and with high quality welds.