The Ford Barn - View Single Post

Big hammer · 09-21-2018, 10:47 AM

You could try running the tank almost dry and add MMO and then work the valve. But the fix is to repair or replace the gas shut off valve. When you remove the valve, install a filter in the valve before installing back into the tank. When I rebuilt the valve for my Late 31, I made sure to grease the internal’s of the valve before reassemble!

09-21-2018, 10:47 AM	#2
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,430	Re: gas tank switch on a 1931 model A tudor You could try running the tank almost dry and add MMO and then work the valve. But the fix is to repair or replace the gas shut off valve. When you remove the valve, install a filter in the valve before installing back into the tank. When I rebuilt the valve for my Late 31, I made sure to grease the internal’s of the valve before reassemble! __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done