The Ford Barn - View Single Post

Kohnke Rebabbitting · 07-28-2018, 12:11 PM

I just realized on the drawing of the plugs, that I don't have the length of the bolt stub shaft, and the " B " dimensions. But these are for a 1/8th inch bar, and Kwik-Way is 1.250, anyway, but you get the idea.

Herm.

07-28-2018, 12:11 PM	#11
Kohnke Rebabbitting Senior Member Join Date: May 2010 Location: 60615,330th Ave.,Clare, Iowa, 50524 Posts: 1,457	Re: Centering a Model A Crank, in a Block ! I just realized on the drawing of the plugs, that I don't have the length of the bolt stub shaft, and the " B " dimensions. But these are for a 1/8th inch bar, and Kwik-Way is 1.250, anyway, but you get the idea. Herm.